Category: SIDEMOUNT

Choosing a Sidemount CCR

Posted on | by matt

I got asked recently about choosing a Sidemount CCR. Of course, this is a subject that will lead to war on social media, but I thought I would put my reasons into the mix.

 

Manual v E-CCR

 

Many cave and very experienced (old?) CCR divers favour a manual unit. It makes sense in a lot of ways being able to manually control loop volume and PO2 in an environment with a lot of depth changes. The thing is, if you stop doing this on a manual unit it can go hypoxic, or if a constant flow valve type even hyperoxia. As any CCR diver will tell you both those situations are very, very bad.

 

E-CCR’s and the associated components and electronics are these days very reliable. It is technology that will keep you alive in the event you are distracted by an incident or task loaded. Good E-CCR’s can also be run as a manual unit to manage failures, but also as a choice, say to control loop volume in changing depths, but with a low safety set point so the unit will automatically maintain a breathable loop if the user does not, say 0.4. So, all the advantages of manual, without the risks specific to manual.

 

To my mind manuals are yesterday’s technology with no functionality or benefit and considerably more risk over an E-CCR unit. Run the E-CCR manually over a low setpoint and you keep all the benefits of manual with a significant safety net. Manual CCR is really stepping back 10-20 years. If you think todays electronics risk of failure justifies a manual unit you haven’t really looked at the reliability of today’s electronics.

 

If this argument makes sense to you then units like the Kiss Sidewinder, Sidekick and Golem Flex amongst others need huge advantages in other areas to overcome their manual basis.

 

Counterlungs

 

This is a big challenge on Sidemount ccr’s. The units desired position means that it is difficult to get counterlungs that are in the right place relevant to your own lungs to minimise hydrostatic differences between the two and make breathing easy, known as work of breathing or WOB. There are really 3 main solutions that Sidemount ccr designers have used.

 

Bellows/ Accordion style counterlungs

 

The benefit of these is that they fit nicely into a cylinder type tube. Because they act as both inhale and exhale lung, you are effectively transferring a breath from your lungs to outside your hip or chest. This causes buoyancy changes. These changes demand a cross tensioning of the unit to stop it moving as it becomes alternatively positive and negatively buoyant. If done well the unit does not move, but this fixation means the diver must compensate for the buoyancy change at the hip with each breath.

 

It is also a challenge to make bellows lungs flood tolerant. Any unit that is not flood tolerant is a massive risk and puts a big mark for me against units with these lungs, I could maybe cope with the irritation of my hip being lifted and dropped with each breath… I’d rather not!  These lung types have another big issue, they will not breathe at all when vertical and as much as we aspire to flat trim all the time, some wrecks and caves are not very accommodating to this need!

 

External lungs

 

The most popular unit with these lungs is the Kiss Sidewinder, it really helps work of breathing, probably best in class, but means both the lungs and the breathing hose (over shoulder routing) are very exposed. Demounting the unit to pass a restriction is also challenging.

 

Inhale/exhale lung

 

As far as I know only the Liberty, Proteus and T Reb have proper inhale lungs with good water traps. This means they are flood tolerant and have no buoyancy change or hip lift for the diver with each breath. The Liberty lung position is especially good for work of breathing. This design allows water to be purged from the exhale lung making a flood recovery (say someone kicked out your mouthpiece briefly) possible.

 

In summary a flood tolerant solution with good work of breathing in all positions is paramount. If achieving this means more plumbing routed around the body to offboard lungs and creates an inability to demount the unit, then why even bother using a side mount unit, unless you dive flat, height restricted bedding planes!

 

Onboard v Offboard Gases

 

Almost all the Sidemount units on the market today rely on offboard gas connections to O2 and/or diluent gases. Some of them look like a home plumbed bathroom with the amount of connections and hoses routed across and around the body. I have seen divers in ‘Sidemount’ that have o2 and diluent bottles mounted on a backplate defeating many of the advantages that Sidemount was developed for.  Commonly O2 bottles are butt mounted along with suit bottles and torches. Now I have a fair amount of real estate on my butt… but all that is too much! Any offboard to lungs or gases makes mounting and demounting the unit a pain.

 

The only unit I know that has all onboard gas is the Liberty. Now, you want the ability to offboard gas in case of primary supply failures, the Liberty needs some mods to make this work, but they are simple and easy to do.

 

Size, Position on Body, Streamlined

 

Open circuit sidemount’s main advantages are that cylinders are trimmed and tight to the body, that they have no protrusions and are unmoving. Equally important is that they are quick and easy to don and doff. This achieves a flexible torso for the diver allowing twisting and bending. Demounting the cylinders in a dive creates a profile allowing gas in front and gas behind for restrictions, as well as leaving a very small profile for the diver.

 

This open circuit sidemount flexibility is compromised in any Sidemount CCR that is bigger than a 12-litre steel in height and circumference, has offboard gas feeds and blocks or external components like scrubbers or counterlungs.

 

There are only a very few units that to my mind are streamlined and the right size, two are the T Reb and the Liberty. As the T Reb has offboard gas I am afraid it gets crossed off my list.

 

So, there you have it, my criteria for a Sidemount CCR

 

  • No offboard Components or plumbing
  • Full ECCR Electronics
  • Easy to run Manually with a low setpoint
  • All gases on board
  • Flood Tolerant
  • Easy WOB in all positions – so no bellows counterlungs
  • Ability to have offboard gases added in an emergency

 

and the Liberty is the only unit that meets all the requirements.

 

Others will argue, though justifying the downside of manual units, bellows or offboard lungs, offboard gases etc is going to need an original and well reasoned argument if I would change my mind!

 

 

Matt

Matt Jevon, M.Sc. F. IoD is a Full Expedition level Trimix and Cave instructor on OC and CCR with TDI and ANDI. He is the JJ-CCR and Divesoft Liberty Sidemount instructor and dealer for Ireland. Matt’s personal diving has included cave exploration in the Philippines, wreck projects in Croatia and Ireland as well as being one of the inaugural dirty dozen in Truk! Matt has held accreditations as an interdisciplinary sports scientist, sports psychologist with BASES and was a British Olympic Registered Strength and Conditioning Coach and invitee on the Olympic Psychology Advisory Group. Matt works in high performance business as a board advisor and non-exec, high performance sport and is a partner in South West Technical Diving in Ireland. www.swt.ie and writes the Facebook page Psychological Skills for Diving

#tdidivecentre #andifacility #Apekstechnicalcentre #caveinstructor #jjccrfactoryservicecentre #JJCCR  #ANDI #nolimitsexploration #cavediving #Apeks #divesoft #sidemountccr #southwestech #nautilus #othree90ninety  #divemorepostless #xdeep #TDI #technicaldiving #scaleolights #rebreathers #seacraft #kubidrygloves #sidemountessentialsinstructor #sidemountccr #libertyccr #jjccr_official #wedontsellwhatwedontdive #nobubbles #diving #deepdive #techdiving #technicaldiving #ccrdiver #underwater #trimix #wreckdiver #cavediver

 

TDI Technical Sidemount

Posted on | by matt
[et_pb_section admin_label=”section”][et_pb_row admin_label=”row”][et_pb_column type=”2_3″][et_pb_image admin_label=”Image” src=”http://swt.ie/wp-content/uploads/2016/01/sidemount-SDI-TDI-elerning.jpg” title_text=”Start your Elerning with South West Tech Diving our tdi facility number is 1004126″ show_in_lightbox=”off” url=”https://www.tdisdi.com/elearning-courses/sditdi-sidemount-diver/” url_new_window=”on” use_overlay=”off” animation=”left” sticky=”off” align=”left” force_fullwidth=”off” always_center_on_mobile=”on” use_border_color=”off” border_color=”#ffffff” border_style=”solid”] [/et_pb_image][et_pb_text admin_label=”Text” background_layout=”light” text_orientation=”left” text_font_size=”14″ use_border_color=”off” border_color=”#ffffff” border_style=”solid”] [box type=”shadow”]

TDI Technical Sidemount

[/box] Who is it for
The TDI Sidemount Diver Course is the ideal specialty for any diver wishing to use this increasingly popular equipment configuration; either as a stand-alone course OR in conjunction with one of TDI’s other open circuit technical specialties such as Decompression Procedures, Extended Range, Trimix, Advanced Trimix, and Advanced Wreck. If this course is combined, the requirements for BOTH courses must be met. The TDI Sidemount Diver course teaches students how to utilize side-mounted primary cylinders as an alternative to the traditional back-mounted method
What you can expect to learn:
 
The TDI Sidemount Diver Course takes an in-depth look at all of the following
 

  • Gas matching procedures to include dissimilar volumes
  • Gas management utilizing independent cylinders
  • Psychological considerations of technical diving
  • Equipment considerations including:
  • Cylinder options
  • Regulator options
  • BCD/harness options
  • Proper weighting
  • Equipment configurations
  • Communication (light and hand signals)
  • Problem solving in a sidemount configuration
  • Diving in tight or confined spaces
  • Conservation
  • Water entries/exits
  • S-drills specific to sidemount diving

Course Skills

  • Propulsion techniques such as the frog kick, modified frog kick, modified flutter kick, backwards kick, helicopter turns, and hand pulling if appropriate for the environment.
  • Demonstrate adequate buoyancy control; ability to hover at a fixed position in water column without moving hands or feet
  • Demonstrate adequate trim; ability to maintain proper position during the descent, bottom, and ascent portion of the dive
  • Perform the following exercises maintaining trim and buoyancy:
    • Unclipping and attaching sidemount cylinders
    • Perform gas switches with and without a mask
    • Demonstrate the ability to safely manage gas in independent cylinders
    • Demonstrate conservation, awareness, and back referencing techniques
    • Deploy a lift bag

What’s Included
The course fee covers instructional time, manual, use of facilities including pool. Students are expected to cover boat and accommodation costs but we have packages available. Only after the successful completion of the course do you pay your certification fee – “you pay for training – you earn the certification”

[button link=”https://swt.ie/tdi-courses/” type=”small”] Back to Main Menue[/button] [/et_pb_text][et_pb_cta admin_label=”Call To Action” title=”I WANT TO DO THIS” button_url=”https://swt.ie/book-now/” url_new_window=”on” button_text=”BOOK NOW” use_background_color=”on” background_color=”#1e73be” background_layout=”dark” text_orientation=”center” header_font_size=”26″ body_font_size=”14″ use_border_color=”off” border_color=”#ffffff” border_style=”solid” custom_button=”off” button_text_size=”20″ button_border_width=”2″ button_border_radius=”3″ button_letter_spacing=”0″ button_use_icon=”default” button_icon_placement=”right” button_on_hover=”on” button_border_radius_hover=”3″ button_letter_spacing_hover=”0″] [/et_pb_cta][et_pb_image admin_label=”Image” src=”http://swt.ie/wp-content/uploads/2016/01/sidemount-SDI-TDI-elerning.jpg” title_text=”Start your Elerning with South West Tech Diving our tdi facility number is 1004126″ show_in_lightbox=”off” url=”https://www.tdisdi.com/elearning-courses/sditdi-sidemount-diver/” url_new_window=”on” use_overlay=”off” animation=”left” sticky=”off” align=”left” force_fullwidth=”off” always_center_on_mobile=”on” use_border_color=”off” border_color=”#ffffff” border_style=”solid”] [/et_pb_image][/et_pb_column][et_pb_column type=”1_3″][et_pb_image admin_label=”Image” src=”https://swt.ie/wp-content/uploads/2015/12/logo_home.png” show_in_lightbox=”off” url_new_window=”off” animation=”left” sticky=”off” align=”left” force_fullwidth=”off” always_center_on_mobile=”on” use_border_color=”off” border_color=”#ffffff” border_style=”solid”] [/et_pb_image][et_pb_text admin_label=”Text” background_layout=”light” text_orientation=”left” text_font_size=”14″ use_border_color=”off” border_color=”#ffffff” border_style=”solid”]

Prerequisites
Advanced Diver or equivalent, Nitrox recommended, minimum of 40 dives
Student to Instructor Ratio
4:1 (maximum)
No. Sessions
2 x theory; 1 pool practical kit setup session; 3 x open water dives.
Equipment
On joining we will send you a kit list, full kit can be rented for the course
Related Courses
Wreck & Advanced Wreck
Cavern, Cave
Advanced Nitrox
Decompression Procedures
TEC 40, 45 & TEC 50
Foundations of Safer Diving

[/et_pb_text][et_pb_testimonial admin_label=”Testimonial” author=”Kirk K, Kerry” job_title=”Rec Diver” url_new_window=”off” quote_icon=”on” use_background_color=”on” background_color=”#f5f5f5″ background_layout=”light” text_orientation=”left” portrait_border_radius=”90″ portrait_width=”90″ portrait_height=”90″ body_font_size=”14″ use_border_color=”off” border_color=”#ffffff” border_style=”solid”]

I’ve been diving for over 20 years, including instructing and Matt was able to bring my diving skills and knowledge to a completely new level

[/et_pb_testimonial][et_pb_social_media_follow admin_label=”Social Media Follow” link_shape=”rounded_rectangle” background_layout=”light” url_new_window=”on” follow_button=”on”] [et_pb_social_media_follow_network social_network=”facebook” url=”https://www.facebook.com/Southwestech/” skype_action=”call” bg_color=”#3b5998″] facebook [/et_pb_social_media_follow_network] [/et_pb_social_media_follow][et_pb_image admin_label=”Image” src=”http://swt.ie/wp-content/uploads/2015/12/TDI_Sheild_Logo_only_CMYK.jpg” show_in_lightbox=”off” url_new_window=”off” animation=”left” sticky=”off” align=”left” force_fullwidth=”off” always_center_on_mobile=”on” use_border_color=”off” border_color=”#ffffff” border_style=”solid”] [/et_pb_image][/et_pb_column][/et_pb_row][/et_pb_section]